Romilly's HART® and Fieldbus Message Board


[ Follow Ups ] [ Post Followup ] [ Back to top of Message Board ]

Re: HART 7 packet structure

Message posted by Chris Kantzes (chris.kantzes@emerson.com : 144.191.148.3) on 18 December 2013 at 19:24:42.

in reply to: HART 7 packet structure posted by shekar on 28 November 2013 at 16:57:02.

HART commands greater than 256 utilize command expansion. In this case, 0x1F (31) is placed in the command byte for the frame, and the first 2 data bytes (after the byte count) contain the actual command number.



Follow Ups:




Post a Followup

Name:
E-Mail:

Subject: Re: Re: HART 7 packet structure

Comments:


[ Follow Ups ] [ Post Followup ] [ Back to top of Message Board ]